ULB -03 glass level gauge
Visual range: H=L-260;
Nominal pressure: ≤6.3MPa;
Operating temperature: -20.C ~ +250.C;
Needle valve automatically close pressure: ≥ 0.3MPa;
Wetted material: 20, 304, 316 or on request;
Non- wetted material: carbon steel;
Heating steam jacket joints: R3/8 (male thread) or on request;
Heating steam pressure: ≤1.0 MPa;
Distance between flanges' center
Medium
Operating pressure
Operating temperature
Flange standard
Wetted material
Other requirements
ULB -03 glass level gauge is produced basing on the principle of communicating vessels for on-site indicating instrument, the instrument will be introduced medium within the container inside itself, and through the transparent glass to read the actual height of the liquid level. Instrument built with safety valve ball up and down, so when the glass was accidentally destroyed, under the pressure of container, ball automatically turns off the liquid flow channel to avoid excessive liquid leakage.
Main technical parameters
Range (the distance between the flanges' center L): 500mm, 800mm, 1100mm, 1400mm, 1700mm (or on request);Visual range: H=L-260;
Nominal pressure: ≤6.3MPa;
Operating temperature: -20.C ~ +250.C;
Needle valve automatically close pressure: ≥ 0.3MPa;
Wetted material: 20, 304, 316 or on request;
Non- wetted material: carbon steel;
Heating steam jacket joints: R3/8 (male thread) or on request;
Heating steam pressure: ≤1.0 MPa;
| Model | Name | Application |
| ULB-03A | Transparent glass plate level gauge | For colorless transparent liquid, light better place |
| ULB-03B | Transparent glass plate level gauge with heating | For transparent, sticky and easily frozen medium |
| ULB-03C | Reflection glass plate level gauge | For colored liquid, light better place |
| ULB-03D | Reflection glass plate level gauge with heating | For colored, sticky and easily frozen medium |
| Note: If level gauge with scale plate, please write R at the end of model. For example:ULB-03AR | ||
Order requirements
Model and specificationDistance between flanges' center
Medium
Operating pressure
Operating temperature
Flange standard
Wetted material
Other requirements